Blog

The installation of exquisite anti-slip stair nosing in an edifice is absolutely essential to ensure the health and safety of the denizens as well as to augment the pulchritude of the infrastructure. The authorities have implemented specific mandatory regulations like the Accessibility for Ontarians with Disabilities Act or AODA since 2005 to guarantee that the proprietors and contractors oblige to the rules while erecting any building. One of the most effective ways to conform to these regulations is to utilize the sublime Code-Compliant Stair Edge Nosing Solutions while designing the architecture.

 

Regulations and Requirements

 

Within the lofty skyscrapers, the stairways act as one of the most pivotal safety aspects that enables the occupants to exit securely in any circumstance. Stairway safety is crucial for emergency egress, and anti-slip stair nosings are essential in maximizing the safety of all the stairways in numerous ways.

 

The venerable Chapter 10 of the International Building Code encompasses all the means of egress within a building and dedicates a special section for stair nosings. Section 1011 explicitly specifies the regulations for stair nosings. The prerequisites outlined in the IBC ensure that the stair nosings within a facility are uniform and installed securely. To mitigate the tripping hazards, the stair nosings must not protrude more than 11⁄4 inch or 32 mm from the stair tread. Also, the stair nosings in any stairwell are required to be uniform to boost safety.

 

Enhancing Safety

 

The anti-slip stair nosings can improve safety within a facility in various ways. Firstly, the stair nosings provide a non-slip grip to reduce the risk of slips and trips, irrespective of the conditions. Moreover, the stair nosings provide a stark color contrast against the stair. This color contrast enables increased visibility of the step-edge for all the occupants.

 

Many stair nosings feature a photoluminescent strip. This photoluminescent strip increases the color contrast between the step-edge and the substrate and provides excellent visibility of the step-edge in all lighting conditions. The photoluminescent stair nosings shall be applied according to section 1011 of the International Building Code and provide a brightly lit stairway even after the power failure in the facility. The luminescent light does not create shadows and glows brightly so that even in emergency conditions, the occupants can easily navigate the stairways safely.

 

Protecting from Wear and Tear

 

When pondering how people ascend or descend a flight of stairs or observing others doing the same, one would notice that most of us step right onto the edge of the stair. As a result, this is the first part of the stair to exhibit signs of wear and tear. The signs of wear and tear can make a facility appear outdated and unmaintained, hampering the aesthetics of the building. Some people may even question the stairway’s safety if all the stairs appear battered.

 

The stair nosings are an excellent way to not only protect the steps from wear and tear but also to maintain the beauty of the facility. The stair nosings are applied where most people commonly step, the step-edge, to protect the stairs from the heaviest wear and tear. The carpet stair nosings prevent rips and tears in the carpet, which can pose a safety risk and make the building look old and run down. The solid stair nosings help to avoid any marks or chips on the stair. The sleek stair nosing helps to modernize the appearance of the building and protects the step edges in the facility from unsightly wear and tear.

 

A Cost-Effective Solution

 

Without the utilization of stair nosings, one may have to renovate, remodel or even redo the stairways over time, especially in buildings with heavy foot traffic. Safeguarding the investment from the outset is a cost-effective way to ensure that the stairways continue to remain safe without maintenance. The Ecoglo anti-slip stair nosings are sturdy enough to withstand even the heaviest foot traffic without exhibiting signs of wear and tear.

 

With the use of stair nosings, one can increase the lifespan of the stairways in the facility by protecting the step-edge and enhancing the safety of the occupants and residents. Although occasionally an afterthought, for anyone aspiring to upgrade the safety in their facility while improving the appearance, the stair nosings should be the most obvious choice!

 

Tactile Solution Canada: Your Trusted Partner

 

At Tactile Solution Canada, we offer photoluminescent and non-photoluminescent Ecoglo stair nosings that can be “glued” or "screwed” to the existing surface and are incredibly durable and have been tested to withstand even the heaviest foot traffic. Each stair nosings features a non-slip grip to prevent injury and promote safety in the building.

 

Types:

 

Stair nosing put into “wet” concrete

• Photoluminescent Cast In Place Stair Nosings
• Non-Photoluminescent Cast In Place Stair Nosings

Stair nosing “glued” or “screwed” to existent surface

• Non-Photoluminescent Surface Applied Anti-Slip Strips
• Photoluminescent Surface Applied Anti-Slip Contrast Strip

Features:

• Available in different colors
• AODA, CSA, ISO, provincial, and national building codes compliant
• No radioactivity or toxicity
• Wear and abrasion-resistant
• Slip resistance
• Easy to clean

 

Prioritize the stairway safety in your facility by contacting Tactile Solution Canada today!

In our fast-paced world, safety and accessibility in public spaces should be a top priority. One crucial aspect that demands special attention is flooring, especially for those with visual impairments.

 

Enter Armor Tile - a reliable and effective solution that ensures enhanced safety and convenience for everyone. This specialized flooring system has been designed to help individuals with visual impairments navigate their surroundings confidently while prioritizing safety. Keep reading to discover more about the benefits of using the Armor Tile Tactile System.

 

What is Armor Tile Tactile System?

 

Armor-Tile provides a broad range of detectable warning tactile systems that meet Full AODA/CSA/ISO and OBC compliance standards. These products are versatile and can be used in various locations, such as transit platforms, curb ramps, stairwells, escalator approaches, pedestrian crossings, parking areas, reflecting pools, multi-modal transit centers, and building entrances.

 

Types of Armor Tile Tactile System

 

Armor Tile is available in two primary types: Cast-in-place Armor Tile and Surface Applied Armor Tile.

 

Cast-in-place Armor Tile: 

 

Armor-Tile Cast in Place Tactile systems involve embedding the tactile indicators directly into wet concrete during the construction or renovation process. This type of installation provides a seamless and long-lasting solution that becomes an integral part of the flooring.

 

Surface Applied Armor Tile: 

 

Surface Applied Armor Tile, as the name suggests, is applied directly on top of existing surfaces using appropriate adhesives. This type of installation is ideal for retrofitting projects or situations where removing the existing flooring is not feasible. Surface Applied Armor Tile offers a convenient and effective way to upgrade accessibility in various environments.

 

Advantages of Armor Tile Tactile System

 

Enhanced Safety: 

 

Safety is a paramount concern in public spaces, and Armor Tile Tactile System provides an effective way to enhance safety. The tactile indicators help individuals with visual impairments to navigate their surroundings confidently. By incorporating Armor Tile tactile systems, you can create a safer environment that promotes inclusivity and reduces the risk of accidents.

 

Compliance with Accessibility Standards: 

 

In Canada, ensuring accessibility for all is not just a moral obligation but also a legal requirement. Armor Tile's tactile systems are compliant with AODA/CSA/ISO and OBC standards. By choosing Armor Tile Tactile System, you demonstrate your commitment to inclusivity and create a safe environment for everyone, especially people with visual impairments. 

 

Versatility and Customization: 

 

The Armor Tile Tactile System comes in a range of sizes and colors to help business owners and contractors create distinctive and visually pleasing surfaces. It can match the surrounding aesthetics while maintaining compliance with accessibility standards. Whether it's an urban area, a park, or a transportation hub, the Armor Tile Tactile System has the ideal solution for all your tactile flooring requirements.

 

Durability and Strength: 

 

The Armor Tile Tactile System boasts impressive durability and strength, making it an excellent choice for areas with high foot traffic. Its ability to withstand heavy loads, deflect impacts, and brave harsh weather conditions speaks to its exceptional longevity. This system is particularly adept at standing up to wear and tear, ensuring it will remain functional for a long time to come.

 

Armor Tile Tactile System is known for its remarkable durability and strength, making it ideal for high-traffic areas. Its capacity to endure heavy loads, deflect impacts, and withstand bad weather ensures its longevity.

 

 Easy Installation and Maintenance: 

 

Armor Tile's tactile flooring solutions are designed for hassle-free installation. Cast-in-place tiles are integrated into the concrete during construction, while surface-applied tiles can easily adhere to existing surfaces. Additionally, Armor Tiles require minimal maintenance, saving time and effort in upkeep.

 

Takeaway

 

Armor Tile Tactile System is the ultimate solution for enhancing safety and accessibility while meeting compliance standards. Its durability, versatility, and easy installation make it an ideal choice for various public spaces. Take a step towards improved safety and accessibility by visiting our Armor Tile Tactile System section today. You can rely on Tactile Solution Canada as your go-to provider for the Armor Tile Tactile System.

In emergency situations, especially during power outages or in low light conditions, having clear and visible signage can be critical for the safety of individuals. That's where photoluminescent emergency exit signs come into play. These innovative signs offer a reliable and efficient solution for guiding people toward exits and ensuring a swift and orderly evacuation. This blog will explore the benefits of photoluminescent emergency exit signs and how they can help people evacuate in low-light conditions.

 

When emergencies strike, such as fires, earthquakes, or power failures, it is crucial to have clear evacuation pathways and exit signs that remain visible even in low-light situations. Traditional exit signs rely on electricity to remain lit, making them ineffective during power outages. This is where photoluminescent emergency exit signs prove to be a reliable and efficient solution.

 

Understanding Photoluminescent Technology

 

Photoluminescent technology is based on the principle of absorbing and storing light energy from ambient sources and then releasing it as a glow when the lights go out. Photoluminescent materials are typically made of phosphors that possess the unique ability to absorb and emit light. These materials charge quickly under normal lighting conditions and emit light gradually over an extended period.

 

The Advantages of Photoluminescent Emergency Exit Signs

 

1. Increased Visibility

 

Photoluminescent exit signs provide enhanced visibility in low-light conditions. The emitted glow is bright and easily distinguishable, ensuring that people can swiftly locate exit routes and emergency exits.

 

2. Independence from Electrical Power

 

Unlike traditional exit signs, photoluminescent signs do not rely on electricity to remain illuminated. This makes them highly reliable during power failures or any situation where electricity is unavailable.

 

3. Longevity

 

Photoluminescent materials have a prolonged glowing capability, making them highly durable and long-lasting. They can remain illuminated for hours after being exposed to ambient light, ensuring continuous visibility throughout an evacuation process.

 

4. Environmentally Friendly

 

Photoluminescent exit signs are eco-friendly as they do not consume electricity. They reduce energy consumption and contribute to a greener environment, aligning with sustainable practices.

 

Compliance with Canadian Codes and Regulations

 

In Canada, building codes and regulations play a crucial role in ensuring the safety and well-being of occupants. Photoluminescent emergency exit signs meet the requirements set by Canadian codes and regulations, making them a suitable choice for contractors and building owners. They adhere to the guidelines established by organizations such as the National Fire Code of Canada (NFCC) and the Canadian Standards Association (CSA).

 

To ensure safety in emergency situations, it's crucial to have exit signs that meet code compliance. That's why all exit signs must be ULC S572 certified, which guarantees they've gone through rigorous testing and will perform when needed the most.

 

The Accessibility for Ontarians with Disabilities Act, 2005 (AODA) was enacted on June 13, 2005, to ensure accessibility standards that benefit all Ontarians. The ultimate goal is to achieve inclusivity and equal access for individuals with disabilities concerning goods, services, facilities, employment opportunities, accommodation options, as well as buildings' structures and premises by January 1st, 2025.

 

To further reinforce this commitment towards accessibility acts in Ontario, the new Building Code regulations were amended accordingly via Ontario Regulation 368/13 dated December 27th,2013 which made it mandatory for businesses to comply with updated standards reflecting a higher degree of accessibility requirements. These amendments came into effect from January 1st, 2015, onwards, providing ample preparation time frames for those concerned.

 

Installation and Maintenance of Photoluminescent Exit Signs

 

Installing photoluminescent exit signs is a straightforward process. They can be easily mounted on walls, doors, or ceilings using adhesive or screws. It is essential to ensure proper placement for maximum visibility.

 

Maintenance of photoluminescent exit signs is minimal. Regular cleaning with non-abrasive materials and keeping the signs free from obstructions are typically sufficient to maintain their effectiveness.

 

The Cost-Effectiveness of Photoluminescent Exit Signs

 

Photoluminescent exit signs offer cost savings over time. They eliminate the need for electrical connections, reducing energy consumption and lowering utility costs. Additionally, their long lifespan minimizes replacement and maintenance expenses.

 

Enhancing Safety and Peace of Mind

 

By installing photoluminescent emergency exit signs, contractors in Canada can contribute to the safety and well-being of building occupants. These signs provide clear guidance during emergencies, reduce panic, and facilitate a swift and organized evacuation process. They instill confidence in occupants and ensure their peace of mind.

 

Product feature of Ecoglo Standard Series Photoluminescent Exit Sign System available at Tactile Solution Canada

 

• LEED points qualified for energy conservation and sustainability, ULC S572 listed for Photoluminescent and Self-Luminous Exit Signs
• 50/75-foot visibility rating
• No electricity or batteries are required
• Indoor installation, only
• Standard twenty-five-year warranty
• Requires exposure to at least 54 lux (5 foot-candles) of fluorescent, metal halide, mercury vapor, or other 4000K light illumination for a minimum of 60 minutes to become fully operational
• Non-toxic and non-radioactive
• ULC certified/listing no. E344049/4RG2

 

Takeaway

 

Photoluminescent emergency exit signs offer a reliable and efficient solution for guiding people during evacuations, especially in low-light conditions. With their increased visibility, independence from electrical power, and compliance with Canadian codes, these signs are an excellent choice for contractors in Canada. By prioritizing safety and incorporating photoluminescent technology, contractors can create safer environments for building occupants. Tactile Solution Canada is your go-to solution provider for photoluminescent exit signs. Discover our range of Ecoglo photoluminescent exit signs today and make your facility smartly accessible.

 

FAQs

 

Are photoluminescent exit signs suitable for all types of buildings?

 

Yes, photoluminescent exit signs are suitable for a wide range of buildings, including residential, commercial, and industrial structures.

 

Do photoluminescent exit signs require any special maintenance?

 

Photoluminescent exit signs have minimal maintenance requirements. Regular cleaning and keeping them free from obstructions are usually sufficient.

 

Are photoluminescent exit signs compliant with Canadian building codes?

 

Yes, photoluminescent exit signs meet the requirements set by Canadian building codes and regulations, ensuring their suitability for use in Canada.

 

How long do photoluminescent exit signs remain illuminated?

 

Photoluminescent exit signs can remain illuminated for 70 hours after 1 hour of 54 lux charging, ensuring visibility during an evacuation.

 

Do photoluminescent exit signs require any electrical connections?

 

No, photoluminescent exit signs do not require any electrical connections. They operate independently, making them highly reliable during power outages.

In the bustling world we live in, accessibility and safety are paramount. Whether it's navigating through public spaces or shopping centers, individuals with visual impairments require tactile indicators to enhance their mobility and ensure their well-being. 

 

Among the many options available in the market, Elan Porcelain Tactile Indicators have emerged as reliable solutions for contractors and business owners alike. With its durable construction, versatility, and aesthetic appeal, Elan Porcelain Tactile Indicators offer a seamless blend of functionality and style. In this blog post, we’ll cover all you need to know about Elan Porcelain Tactile Indicators. Read out to know!

 

An Overview of Elan Tile Porcelain Tactile Indicators

 

Elan Tile stands out as the top porcelain tactile indicator chosen by experts in the field of designing and constructing premium commercial, institutional  spaces. With its exceptional composition of top-quality materials, ElanTM Tile surpasses the rigorous EN 14411 standard, earning the esteemed designation of "Porcelain Stoneware" and ensuring its suitability for indoor uses. The Elan Tile line represents the latest generation of excellence from Kinesik, a company that specializes in providing solutions for accessibility and safety in the built environment.

 

Types of Elan Tile Porcelain Tactile Indicators

 

Elan Tile Porcelain Wayfinding Bar Tile: 

 

Elan Tile Porcelain Tactile Indicator Wayfinding Bars are specifically designed for style and engineered for excellent performance. These wayfinding bars use the highest-quality raw materials, enabling them to meet the standards of Porcelain Stoneware and are appropriate for use in indoor applications. 

 

Elan Tile Wayfinding Bars offer durable and versatile walking surfaces with directional indicators. These indicators are crucial for the effective and safe navigation of visually impaired individuals within their surroundings. By following the path created by the Porcelain Wayfinding Bars, pedestrians can confidently and correctly reach their desired destinations.

 

Elan Tile Porcelain Wayfinding Bars prioritize safety, convenience, and compliance with relevant codes and regulations.

 

Features

 

• Certified porcelain stoneware for maximum durability and surface hardness
• Not affected by water, strains, or chemicals
• R11 finish meets most demanding slip resistance requirements for construction projects in high traffic areas
• 5-year manufacturer’s warranty

 

Elan Tile Porcelain Attention Domes Tile: 

 

Elan Tile's Porcelain Tactile Indicator Attention Domes are designed using the finest quality raw materials, enabling the product to meet the standards of Porcelain Stoneware. These tactile indicators are suitable for use interior applications.

 

Elan Tile serves as a warning to pedestrians about potentially hazardous conditions ahead, such as the end of a curb or an edge drop-off. They are designed to enhance accessibility and ensure the safety of all individuals. Elan Tile Porcelain Attention Domes are fully compliant with the Canadian Accessibility code.

 

Features:

• Not affected by chemicals or stains
• Excellent resistance to thermal shock & deep abrasions
• Easy installation for interior environments
• 5-year manufacturer’s warranty

Benefits of Elan Tile Porcelain Tactile Indicators

 

• Durability: Elan Porcelain Tactile Indicators are created with high-quality porcelain material, making them resistant to wear, weather, and heavy foot traffic. This ensures long-lasting performance, reducing the need for frequent replacements and maintenance.
• Slip Resistance: The textured surface of Elan Porcelain Tactile Indicators enhances slip resistance, minimizing the risk of accidents and providing a secure walking experience for visually impaired individuals.
• Aesthetics: Elan Porcelain Tactile Indicators are available in various colors and designs, allowing contractors and business owners to choose options that seamlessly blend with their existing architectural aesthetics. This ensures that accessibility features do not compromise the overall visual appeal of the space.

 

Installation Instruction Elan Tile Porcelain Tactile Indicators

 

•  Porcelain TWSI must be laid side by side, with a maximum space of 10mm between each tile. Avoid butt joining the tiles, as normal substrate movement can lead to failure.

 

• Porcelain TWSI must not be laid into wet concrete. This installation method does not allow for a space between the tiles and surrounding surfaces. The lack of space can cause problems due to the expansion and contraction of the substrate. It is advised to seal all joints using a compressible sealant or an appropriate grouting material.

 

• In most cases, a 12mm recess is necessary when installing tiles on concrete or bitumen surfaces. This can be achieved by using a template at the concrete/bitumen pouring stage. Alternatively, the existing concrete/bitumen substrate can be saw cut to provide a suitable recess. This is achieved by saw-cutting the substrate, making sure to leave enough space between each tile and around the perimeter of external tiles. The substrate is then removed to a depth of approximately 50mm, and the resulting void is filled with concrete or a suitable screeding compound. This provides a solid base for the tiles. Tiles are then laid into this recess using a suitable adhesive. 

 

• Porcelain TWSI must be installed using an approved adhesive that is suitable for the sub-floor. The adhesive must be mixed and applied in strict accordance with the adhesive manufacturer’s recommended instructions. The adhesive must be spread using a 10mm square notched trowel, and the tiles must be placed into the wet film of adhesive.

 

• In order to ensure a successful installation, it is crucial to follow the correct procedures for adhesive application and ensure proper transference between the tile and substrate. When installing Porcelain TWSI tiles, it is extremely important to spread the adhesive in a way that achieves 100% coverage on the back of the tile. Additionally, the tiles should be gently pressed into the substrate to facilitate adhesive transfer. To ensure a strong and durable installation, it is important to avoid grid sticking or adhering only to the corners of the tiles. Instead, apply force carefully after laying the tiles. This will help eliminate air gaps and ensure proper transfer of the adhesive onto the back of the tile. By doing so, you will achieve a maximum bond with the sub-floor. Additionally, it is crucial to make sure that the adhesive is spread right to the edge of each tile for optimal results.

 

• It is recommended to avoid foot traffic on the floor, ideally for 48 hours or at least 24 hours after installation, to allow the adhesive to cure properly.

 

• When using cementitious adhesive, it is crucial to mix the correct proportions of sand, lime, cement, and water. This ensures proper adhesion of the adhesive.

 

• Any excess adhesive should be promptly removed from the surface before it starts to cure. You can use a clean damp cloth with water to wipe away the excess adhesive. 

 

• If the adhesive has already cured on the surface, avoid aggressive rubbing. Instead, use a damp cloth and try to peel the adhesive away from the surface.

 

Bottom Line

 

If you have any specific questions about Elan Tile Porcelain Tactile Indicators, or need assistance in choosing the right tactile solution for your project, you can visit https://www.tactilesolution.ca/ or contact us anytime. 

If you're on the hunt for an affordable and totally legit solution to spruce up those tactile warning surfaces in your fancy interior projects, then you got to check out the Access Tile® Surface Applied Fire Resistant Tactile. Trust us; this thing is a game-changer! It's the only fire-resistant tactile tile in town that meets all the requirements of the Ontario Building Code and other Canadian codes. In this nifty guide, we're going to break it down for you—what it is, how it works, and why it's the bee's knees for your next big project. So, buckle up, and let's dive right in!

 

What is Access Tile® Surface Applied Fire Resistant Tactile?

 

Access Tile® Surface Applied Fire Resistant Tactile is a product that provides tactile walking surface indicators (TWSI) with truncated domes for interior applications in high-rise buildings and is mandatory in buildings higher than 7 floors. TWSI is designed to alert people with visual impairments of potential hazards or changes in direction on the floor surface. Truncated domes are raised bumps that can be felt through footwear or detected by a cane.

 

Access Tile® Surface Applied Fire Resistant Tactile is made of a proprietary composite material called FIRESENTRY-X™, which has a low flame spread and smoke development rating. This means that the product can withstand high temperatures and prevent fire from spreading in case of an emergency. The product also has high slip resistance, durability, and strength, making it suitable for various environments and traffic conditions.

Access Tile® FR is fully compliant with all Canadian Accessibility Codes and meets the standards set by the Ontario Building Code (OBC) 2012 Table 3.1.13.7, ensuring that your premises are easily accessible to everyone.

 

How does Access Tile® Surface Applied Fire Resistant Tactile work?

 

Access Tile® Surface Applied Fire Resistant Tactile can be easily installed on any existing concrete surface using adhesive, anchors, and stainless-steel pins. The product comes in six different sizes and three standard colors (federal yellow, dark grey, and onyx black) and can be cut to fit any shape or radius. The product also features beveled edges that make a smooth transition between the tile and the floor surface.

 

The product works by providing a contrast in texture, color, and sound between the tile and the surrounding floor surface. This contrast helps people with visual impairments identify the tile's location and direction and the hazard it indicates. For example, the tile can be used to mark the edge of a stairwell, a vestibule to an exit stair or lobby, or a corridor. The tile also helps people without visual impairments to notice the hazard and avoid accidents.

 

Why choose Access Tile® Surface Applied Fire Resistant Tactile?

 

There are many reasons to choose Access Tile® Surface Applied Fire Resistant Tactile for your interior projects, such as:

 

• It is compliant with Canadian accessibility codes and meets the fire safety standards of the Ontario Building Code.
• It is cost-effective and easy to install, maintain, and replace.
• It is durable and resistant to wear and tear, weather conditions, chemicals, and salt spray.
• It is available in various sizes and colors to suit your design preferences and needs.
• A 5-year manufacturer’s warranty backs it.

 

Installation guide

 

• Place the tile on the designated location and trace the perimeter with a thin permanent marker.
• Set the tile aside and, using a 4” diamond cup grinder, prepare the concrete within the marked location and in correspondence with the location requiring adhesive as indicated in the backside of the tile.
• Clear away the dust with a leaf blower, then clean the back of the tile and the concrete with a rag soaked in acetone.
• Apply Tactile Bond and Seal adhesive to the back of the tile (as indicated on the tile). The first bead should be applied thin, ½” from the perimeter edge, and a second thicker bead applied 1” inside of the first.
• Set the tile true and square to the concrete and press down firmly.
• While stepping down on either side of the preformed hole, drill down 3” into the concrete using a hammer drill and the recommended diameter drill bit. Drill through the tile without the hammer option until the tile has been penetrated, then with the hammer option, drill into the concrete.
• While still applying pressure, remove the dust and any adhesive that surfaces and carefully set the supplied color-matched Axius® Fasteners with a plastic-tipped hammer. Repeat steps 6 & 7 while working across the tile from one end until all pre-formed fastener locations are completed.
• Clean the perimeter of the tile and the immediately surrounding concrete with acetone making sure to remove any adhesive that has escaped from beneath the tile. Apply and smooth sealant around the perimeter of the tile.
• Tape all perimeter edges.
• Apply Tactile Bond and Seal around the tile perimeter using care to work sealant into any void between the tile and concrete interface.
• Tool perimeter sealant with a round plastic applicator or spatula to create a cove.
• Remove tape immediately after tooling perimeter sealant.
• DO NOT allow floor traffic until the perimeter sealant has cured sufficiently to avoid tracking.

 

Tiles can be cut to custom sizes or to make a radius using a continuous-rim diamond blade in a circular saw or mini-grinder. The use of a straightedge to guide the cut is advisable where appropriate.

 

Takeaway

 

If you are interested in learning more about Access Tile® Surface Applied Fire Resistant Tactile, please visit our solutions section or contact us today. We are happy to answer any questions you may have and help you find the best tactile solution for your project.

In today's world, it is essential to prioritize accessibility and inclusivity when it comes to public spaces. People with visual impairments face many challenges in navigating their surroundings. That's where the Access Tile Detectable Warning System comes in - an effective solution designed to help visually impaired individuals navigate their surrounding safely & confidently. 

 

Detectable Warning Systems are not only a great way to comply with accessibility guidelines, but they are also a legal requirement under the CSA Act and other international standards. So whether you're a business owner or contractor, installing these systems can help you avoid potential lawsuits and penalties. In this blog post, we'll cover the different types of Access Tile Detectable Warning Systems to help you make an informed decision. Read out to know!

 

What is an Access Tile Detectable Warning System?

 

Access Tile Detectable Warning Systems are strategically installed in public spaces to alert visually impaired pedestrians of potential hazards or directions. These safety flooring systems are installed in curb ramps, doors, elevators, lifts, transit platforms, stairwells, and marinas.

 

They consist of truncated domes, also known as tactile paving or tactile walking surface indicators (TWSIs), which can be detected by the use of a cane or underfoot, providing vital information about changes in the environment.

 

Benefits of Access Tile Detectable Warning Systems

 

1. Increased safety for visually impaired individuals: 

 

Access Tile Detectable Warning Systems provide tactile indicators that can be felt through a cane or underfoot, alerting visually impaired individuals to potential hazards, such as street crossings or changes in elevation. These systems significantly enhance safety by enabling users to detect and avoid obstacles.

 

2. Compliance with accessibility regulations: 

 

Access Tile Detectable Warning Systems are designed to meet the accessibility requirements outlined in regulations like the CSA or AODA Act. By installing these systems, public spaces can ensure compliance with accessibility standards and create an inclusive environment for all individuals.

 

3. Durability and low maintenance: 

 

Access Tile Detectable Warning Systems are engineered for long-lasting performance. They are designed from durable materials that can withstand heavy foot traffic, extreme weather conditions, and other environmental factors. Additionally, these systems require minimal maintenance, reducing the long-term costs associated with upkeep.

 

Types of Access Tile Detectable Warning System

 

Access Tile Detectable Warning Systems are available in various types to accommodate different installation requirements and environments. The three main types include:

 

1. Access® Tile Replaceable Cast-in-Place Tiles: 

 

The Replaceable Cast-in-Place tiles are installed directly into wet 

concrete, effectively integrating the industry's foremost replaceability feature for tactile warning systems.

 

The Access Tile Replaceable Cast-in Place tile indicators are designed to be embedded directly into the concrete, providing a long-lasting and reliable tactile surface for both interior and exterior applications. They comply with Canadian accessibility codes and feature a non-slip texture to enhance safety for all pedestrians. The Access Tile Replaceable Cast-in Place tile indicators are lightweight, durable, and perfect for inside and outside applications, such as: 

 

• Doors and doorways
• Ramps and stairs
• Elevators and lifts
• Washrooms and showers
• Drinking fountains and service counters
• Signs and wayfinding

 

Access® Tile Replaceable Cast-in-Place Tiles are divided into types: Attention Domes and Wayfinding Bars.

 

Attention Domes:  Access Tile's Cast in Place Replaceable Tactile Attention Domes are durable and compliant with Canadian accessibility codes. Installed into wet set concrete at building exits, they provide a safe barrier-free path for pedestrians to cross and can withstand weather and wear and tear. 

 

Wayfinding Bars: Access Tile Replaceable Cast in Place Tactile Walking Surface Indicators are durable, non-slip tiles installed directly into concrete. They comply with Canadian accessibility codes and are ideal for interior and exterior applications. With Access Tile Cast in Place Wayfinding Bars, pedestrians can safely navigate the environment through barrier-free pathways.

 

 2. Access® Tile Surface Applied Tiles: 

 

Access® Tile Surface Applied Tiles are specifically designed to be installed on top of any existing flooring- providing a detectable tactile warning for visually impaired individuals. These tiles are particularly useful in alerting pedestrians when they have reached an unsafe edge. Access Tile Surface Applied Tiles offer a cost-effective alternative to wet set Cast in Place tiles, making them a popular choice.

 

The Surface Applied Tile stands out as the easiest and fastest option available in the market. It is also environmentally conscious, addressing the need for sustainable solutions. Furthermore, Access Tile Surface Applied Tiles fully comply with Canadian Accessibility codes, ensuring adherence to regulations and guidelines.

 

Access® Tile Surface-Applied Tiles are divided into types: Attention Domes and Wayfinding Bars.

 

Attention Domes: Access Tile Surface Applied Domes are affordable detectable warning tiles that are slip-resistant, corrosion-resistant, and abrasion-resistant. They're perfect for retrofitting and can be used in many situations, including transit stations, curb ramps, pedestrian crossings, parking areas, stair landings, and escalator approaches. These tactile attention domes are especially useful for those with visual impairments, as they can be felt through footwear and provide unique sound reflection for guidance canes. With different colors available, they provide visual contrast to warn the public when they have reached an unsafe edge.

 

Wayfinding Bars: Access Tile Surface Applied tiles are the top choice for Tactile Walking Surface Indicators. Easy to handle and install on large open floor areas, the indicated routes with wayfinding bars lead from the entrance to major destinations, such as an information kiosk, registration desk, stairway, elevator, scalators, or store or service doors. Access Tile offers a cost-effective and compliant solution that includes Wayfinding bars for barrier-free navigation. Access Tile Way finding bars also creates barrier-free pathways - ensuring that all pedestrians can navigate their environment safely.

 

3. AccessTile Fire Resistant Surface Applied Tile

 

Access Tile Surface Applied Fire Retardant FIRESENTRY-X Composite Technology offers exceptional resistance against fire. Access Tile Fire Resistant FR complies with the ULC-S 102.2 fire standard, limiting flames to less than 25 and smoke to less than 50. 

 

This fire-resistant tile is the first composite tile to meet the requirements of the Ontario building code. They are compliant to both building code and Fire code and mandatory in all buildings that are higher than 7 floors. Access Tile FR is a cost-effective interior solution for applying TWSI (Tactile Warning Surface Indicators) on tactile warning floor surfaces in areas such as exit stairwells, vestibules to exit stairs, lobbies, and corridors. The Ontario tactile walking surface indicators Surface Applied Fire-Resistant tile is available in three different colors and various sizes to meet the specifications of your building.

 

Features

 

• A cost-effective approach to meet the requirements of the Tactile Warning Surface Indicator (TWSI) for interior tactile warning floor surfaces such as exit stairwells, vestibules to exit stairs and lobbies, and corridors
• Easily cut to conform to various sizes and radius landings
• Comes in three (3) standard colors with Federal color identification numbers
• 5-year manufacturer's warranty

Stairs are one of the most common and essential features of any building, but they can pose a serious safety hazard if not properly designed and maintained. Slippery surfaces, poor lighting, and lack of visibility can lead to falls, injuries, and even fatalities. That’s why it’s crucial for contractors to install stair edge nosing that provides slip resistance, step edge contrast, and luminous egress path marking.

 

One of the best products on the market for this purpose is Ecoglo Stair Edge Nosing. Ecoglo is a leading manufacturer of photoluminescent and non-slip stair-nosing solutions that are durable, versatile, and code compliant. In this comprehensive guide, we will explain what Ecoglo Stair Edge Nosing is, how it works, what its benefits are, and how to install it on different types of stairs.

 

What is Ecoglo Stair Edge Nosing?

 

Ecoglo Stair Edge Nosing is an aluminum stair nosing with a hard-wearing silicon carbide slip-resistance material that is integrally bonded to it. It also has a photoluminescent strip that glows in the dark after being exposed to natural or artificial light. Ecoglo Stair Edge Nosing comes in various shapes and sizes to fit different applications and substrates.

 

Ecoglo Stair Edge Nosing can be installed on concrete, wood, metal, tile, carpet, and resilient flooring stairs. It can be installed in two ways: either by gluing or screwing it to an existing surface or by casting it into wet concrete. Ecoglo provides all the necessary tools and instructions for a smooth and easy installation.

 

How does Ecoglo Stair Edge Nosing work?
 

Ecoglo Stair Edge Nosing works by providing three essential functions: slip resistance, step edge contrast, and luminous egress path marking.

 

• Slip resistance: The silicon carbide material on the stair nosing provides a high level of friction that prevents slips and falls on wet or dry surfaces. It is also abrasion resistant and can withstand years of heavy foot traffic without wearing out.

• Step edge contrast: The stair nosing provides a clear visual distinction between the step edge and the tread or riser. This helps people to see where they are stepping and avoid missteps or trips. The contrast is especially important for people with low vision or color blindness.

• Luminous egress path marking: The photoluminescent strip on the stair nosing emits a bright glow in the dark after being charged by natural or artificial light. This helps people to find their way out of a building in case of a power outage or emergency. The glow lasts for hours and exceeds the emergency egress requirements.

 

What are the benefits of Ecoglo Stair Edge Nosing?

 

Ecoglo Stair Edge Nosing offers many benefits for contractors and building owners alike. Some of these benefits are:

 

• Safety: Ecoglo Stair Edge Nosing reduces the risk of slips and falls on stairs by providing slip resistance, step edge contrast, and luminous egress path marking. It also helps to comply with the building codes and standards on accessibility and fire safety.

• Durability: Ecoglo Stair Edge Nosing is made of high-quality materials that can withstand harsh weather conditions, UV exposure, scratches, and abrasion. It also requires very little maintenance and has a long lifespan.

• Versatility: Ecoglo Stair Edge Nosing can be installed on various types of stairs and substrates. It also comes in different shapes and sizes to suit different applications and preferences.

• Aesthetics: Ecoglo Stair Edge Nosing adds a sleek and modern look to any stairway and enhances the stairs’ appearance by providing a uniform and neat finish.

 

Types of Ecoglo Stair Edge Nosing
 

1. Cast in Place

• Photoluminescent: Ecoglo Photoluminescent Cast in Place Stair Nosings are durable and efficient products that enhance step-edge visibility and safety in any light condition. They are installed into wet concrete and have a non-slip material with photoluminescent technology that glows in the dark for hours. They are also eco-friendly and meet the building code requirements for high rises.

• Non-Photoluminescent: Ecoglo Non-Photoluminescent Step Edge Cast in Place Stair Nosings are aluminum step nosings installed into wet concrete and fit to the edge of stairs. They provide step-edge contrast, anti-slip protection, and a modern look. They are made of non-slip material and aluminum with an anodized finish that is durable, corrosion-resistant, and weather resistant. They are designed for step-edge safety and visibility.

 

2. Surface applied

• Photoluminescent: Ecoglo Non-Slip Photoluminescent Step Edge Contrast Strip is a product that provides slip resistance and step edge visibility in any light condition. It is made of non-slip material and aluminum with a photoluminescent strip that glows in the dark for hours. It is suitable for stairs that need luminous path markings by code. It is easy to install and exceeds the performance standards for photoluminescent path marking.

• Non-Photoluminescent Surface Applied Anti-Slip Strips: Ecoglo provides anti-slip strips to prevent slips or falls on stairs in all weather conditions. Ecoglo's non-photoluminescent anti-slip strips come in three colors - black, yellow, and gray - and two sizes to fit any stairs. These durable, weather-resistant, UV-resistant, stain-resistant, and easy-to-clean strips are made of hard-wearing silicon carbide. Ecoglo's non-photoluminescent, non-slip strips provide an extra non-slip grip for steps and highlight step edges to prevent slips and falls. Ecoglo's surface-applied anti-slip strips are the ideal safety solution for preventing slips and fall on any staircase. The strips offer a secure solution for all seasons and step types.

 

How to install Ecoglo Stair Edge Nosing?

 

Ecoglo Stair Edge Nosing can be installed in two ways: by gluing or screwing it to an existing surface or by casting it into wet concrete.

 

1. Gluing or screwing: This method is suitable for installing stair nosing on concrete, wood, metal, tile, carpet, or resilient flooring stairs. The steps are as follows:

 

• Clean the surface of the stairs and make sure it is dry and free of dust or debris.

• Cut the stair nosing to the desired length using a hacksaw or a chop saw.

• Apply a bead of polyurethane adhesive along the back edge of the stair nosing.

• Position the stair nosing on the step edge and press firmly.

• Drill holes through the pre-punched holes on the stair nosing using a drill bit.

• Insert screws through the holes and tighten them using a screwdriver.

• Wipe off any excess adhesive using a cloth.

• Repeat the process for each step.

 

2. Casting into wet concrete: This method is suitable for installing stair nosing on new concrete stairs. The steps are as follows:

 

• Prepare the concrete mix according to the manufacturer’s instructions.

• Pour the concrete mix into the formwork of the stairs.

• Level the concrete surface using a trowel or a screed.

• Place the stair nosing on the wet concrete along the step edge.

• Press down gently until the stair nosing is flush with the concrete surface.

• Tap lightly along the length of the stair, nosing using a rubber mallet to ensure proper bonding.

• Repeat the process for each step.

• Allow the concrete to cure completely before removing the formwork.

 

Takeaway

 

Ecoglo Stair Edge Nosing is an innovative product that provides slip resistance, step edge contrast, and luminous egress path marking for stairs. It is durable, versatile, code compliant, and easy to install, and it also improves the safety and aesthetics of any stairway. If you are looking for a reliable and affordable solution for your stairway needs, look no further than Ecoglo Stair Edge Nosing solutions at your own website Tactile Solutions Canada.

As cities continue to grow and evolve, it is more crucial than ever to ensure the security and accessibility of public areas. Tactile Walking Surface Indicators (TWSIs) installation is a vital step in enhancing the mobility and safety of pedestrians.

 

With the installation of TWSI, visually impaired individuals can navigate unfamiliar surrounding safely and confidently. These indicators serve as a tangible communication channel, bridging the gap between the built environment and the needs of pedestrians with disabilities.

 

In Canada, the use of tactile walking surface indicators is mandatory as per the Accessibility for Ontarians with Disabilities Act (AODA). To learn more about TWSI and how they contribute to safer pedestrian traveling, read out the blog post: 

 

What are Tactile Walking Surface Indicators (TWSIs)?

 

TWSIs, also known as tactile paving or detectable warning plates, are standardized patterns of textured ground surfaces that provide sensory feedback to pedestrians with visual impairments.

 

These indicators consist of raised truncated domes or bars that can be felt underfoot or detected with a mobility cane. It provides sensory feedback to individuals, alerting them to potential hazards or guiding them along a designated path. By enhancing navigation and safety, TWSIs serve as a valuable tool for visually impaired pedestrians.

 

How TWSI Makes Pedestrian Traveling Safer? 

 

TWSI, or detectable warning surfaces, are installed on sidewalks for pedestrians to provide individuals with visual impairments with important sensory information. These indicators help people with navigation, hazard identification, and direction. Using TWSI, visually impaired people can travel safely and more comfortably through the public spaces.

 

TWSI not only helps with navigation but also acts as a warning system for pedestrian crossings and hazardous areas. TWSI's distinctive patterns and colors might serve as a warning to pedestrians of the existence of busy intersections, railway crossings, or areas with potential dangers.

 

The AODA Act and the Importance of Tactile Walking Surface Indicators

 

The AODA Act, implemented in Ontario, Canada, aims to make the province accessible for individuals with visual disabilities. As part of the act, it is mandatory to use TWSI in certain public spaces to ensure the safety and accessibility of pedestrian pathways. By incorporating TWSI, the AODA Act emphasizes the importance of inclusivity and equal opportunities for everyone, regardless of their abilities.

 

Importance of TWSI

 

Enhancing Accessibility and Independence: 

 

Tactile walking surface indicators (TWSIs) are essential for improving the accessibility and independence of individuals with visual impairments. 

 

By providing tactile cues and underfoot feedback, TWSIs enable pedestrians to detect changes in their path, such as upcoming intersections, stairs, or other potentially dangerous areas. These indicators consist of detectable, raised patterns that are easily identifiable by touch, allowing visually impaired individuals to navigate confidently and efficiently.

 

Promoting Safety and Risk Mitigation: 

 

The main goal of Tactile Walking Surface Indicators (TWSIs) is to enhance safety and minimize risks for pedestrians, especially those with visual impairments. By incorporating tactile indicators at specific locations, such as curb ramps and transit stops, potential hazards can be effectively communicated to individuals relying on their sense of touch.. This proactive safety measure plays a crucial role in preventing accidents and creating a more inclusive environment for all people.

 

Consistency and Standardization: 

 

The implementation of TWSIs, in accordance with the Accessibility for Ontarians with Disabilities Act (AODA) and its guidelines, brings consistency and standardization to public spaces. These indicators are carefully designed to ensure uniformity and ease of recognition, allowing individuals to navigate confidently and independently.

 

By adhering to the guidelines set forth by the AODA, businesses can create a harmonized environment where TWSIs are consistently present and appropriately placed. This consistency helps individuals with visual impairments develop a mental map of their surroundings, enhancing their ability to navigate public spaces with greater confidence and safety.

 

Places Where Tactile Walking Surface Indicators Are Utilized

 

TWSIs are utilized in a variety of locations to provide crucial information to pedestrians with visual impairments. Here are some key areas where the use of tactile indicators is common:

 

Crosswalks and Intersections: 

 

Crosswalks and intersections are high-traffic areas where pedestrians need clear and concise cues to navigate safely. TWSIs are employed to mark crosswalks, signaling pedestrians when they have reached a designated crossing point. These indicators often feature distinctive patterns, such as truncated domes, to differentiate them from the surrounding surfaces.

 

Transit Stations and Platforms: 

 

Transit platforms and stations can be challenging environments with multiple pathways, stairs, and boarding areas. Tactile walking surface indicators are strategically placed to direct people to boarding zones, ticket booths, and other essential points of interest within the transit system. This enables visually impaired commuters to confidently navigate public transportation networks.

 

Pedestrian Islands and Medians: 

 

Pedestrian islands and medians help divide busy roadways, offering pedestrians a safe space to pause during their journey. TWSIs are incorporated into these areas to alert individuals with visual impairments of the separation between vehicle lanes. By providing tactile guidance, these indicators facilitate the decision-making process when crossing multiple lanes of traffic.

 

Government Buildings and Public Spaces: 

 

TWSI plays a significant role in the government buildings, such as city halls and libraries, and other public spaces, such as parks and sidewalks, to help people with visual impairments safely and independently navigate these environments.

 

Tactile Solutions - Your Partner in Code-Compliant Accessibility

 

Installing TWSIs is a crucial step in making pedestrian traveling safer. Not only does it help to meet legal requirements, but it also improves safety and navigation for all pedestrians. 

 

At Tactile Solutions, we are committed to providing reliable, superior-quality TWSIs that meet or exceed all relevant regulations and specifications. We offer a variety of colors, shapes, and sizes to meet the specific needs of each project. In addition, our TWSIs are designed for easy installation and long-lasting performance, ensuring that contractors or businesses can meet their accessibility obligations with confidence. 

Have you ever wondered how you would find your way out of a building in case of an emergency, especially if the power goes out or there is smoke in the air? Or how would you navigate a dark or dimly lit venue without tripping or bumping into obstacles? Or how would you communicate important information to your staff or visitors in case of a disaster?

 

If you have, then you might be interested in learning more about Ecoglo, which specializes in photoluminescent exit signs and egress path markers that can provide a clear and reliable guidance system in any situation.

 

What is Ecoglo?

 

Ecoglo International was established in 1997 and has developed advanced photoluminescent technology to create high visibility stair edge nosing and evacuation route products like emergency exit signs and handrail systems that never fail. Ecoglo tactile solutions are designed to comply with international building codes to meet exit sign and emergency lighting requirements, including ULC572S, UL924 signs, NFPA 101 Solutions and International Fire Code Solutions.

 

How does it work?

 

Made with a patented manufacturing process known as High-Temperature Curing or HTC, Ecoglo products are extremely durable and have a minimum indoor life expectancy of 30 years. Compare this with mass-produced PVC products, which very quickly degrade with UV exposure. Ecoglo products are sustainable, use no electricity and cost a fraction of the electrical alternative. The photoluminescent pigments in Ecoglo products absorb and store both natural and recycled electrical light before re-emitting the energy as a glow when the lights go out.

 

The market overview & how it’s changing?

 

The market for emergency lighting systems has traditionally been dominated by the electrical industry, but the innovative technology behind Ecoglo photoluminescent systems has disrupted this practice and delivers real cost and sustainability advantages to the economy. Ecoglo products are reliable, with no lamp or battery failure and virtually no maintenance costs. All Ecoglo products have met internationally accredited testing and can be seen in many installations around the world, including Dubai's Burj Khalifa, Melbourne Cricket Ground and New York City Transit.

 

Ecoglo has also been installed in thousands of offices, hospitals, airports, transit and infrastructure facilities, universities, warehouses and stadiums worldwide. Ecoglo offers an ever-evolving range of products, including exit signage, step edging, path and handrail markers, fire protection signs, disaster preparedness signs, and next-generation Hybrid LED/PL Exit Sign Systems.

 

Ecoglo products for pathfinding: benefits explained!

 

Ecoglo products are designed to provide the following benefits for your pathfinding needs:

 

• Step edge contrast: Ecoglo products have a photoluminescent colored anti-slip strip that provides excellent contrast and visibility for the edge of each step in all lighting conditions.

• Visibility in all light conditions: Ecoglo products have a PL strip that glows brightly in the dark for hours, giving your patrons confidence and direction in exiting, even in an emergency.

• Slip-resistance: Ecoglo products have a hard-wearing silicon carbide non-slip material that reduces slips and falls in all weather conditions.

• Resistance to wear: Ecoglo products are made of durable aluminum and polymer that can withstand thousands of people walking on them without losing their luminance or performance.

 

How Can Ecoglo Enhance Your Safety and Visibility in Any Situation?

 

Ecoglo’s products are designed to meet or exceed the most stringent building codes and standards around the world, such as NFPA 101 Life Safety Code and International Fire Code (IFC) / International Building Code (IBC). They are also cost-effective, environmentally friendly, easy to install and maintain, and suitable for indoor and outdoor use.

 

Ecoglo offers a wide range of products for different applications and settings, such as:

 

Exit signs: Ecoglo’s exit signs are UL 924 certified and comply with many international building codes. They are available in various shapes, sizes, colors, and languages. They can also be customized to suit your specific needs and preferences. Ecoglo’s exit signs do not require electricity or batteries, and they are visible in all light conditions.

 

Egress path markers: Ecoglo’s egress path markers include step edge contrast strips, non-slip strips, guidance strips, handrail strips, perimeter demarcation lines, obstacle markers, door frame markings, emergency exit symbols, and door hardware markings. They are designed to outline the exit path and highlight important features such as steps, landings, doors, handrails, obstacles, and information placards. They are also slip-resistant and abrasion-resistant.

 

Emergency signage: Ecoglo’s emergency signage includes evacuation maps, running man signs, fire extinguisher signs, and disaster preparedness signs. They are designed to provide clear and concise information and instructions to occupants in case of an emergency. They are also easy to read and understand in all light conditions.

 

Stadium and venue products: Ecoglo’s stadium and venue products include aisle and seat markers, handrail markers, step edging products, directional markers, floor identification markers, hybrid signs, and best practice photoluminescent path marking solutions. They are designed to enhance the safety and visibility of patrons and staff in stadia, arenas, theatres, cinemas, concert halls, auditoriums, museums, galleries, and other types of venues. They are also ideal for low-light and dark events.

 

Ecoglo vs. Traditional Emergency Lighting Backup Systems

 

Criteria	Ecoglo	Traditional
Effectiveness	- Can provide over 100 hours of continuous illumination from photoluminescent pigments - Can create a clear image of the exit path by outlining steps, landings, doors, etc. - Can show the safe exit path even in heavy smoke - Can recharge for a 2-hour evacuation in as little as 10 minutes	- Can experience problems with partial or total failure - Have limited operating time - Cast insufficient light - Can be easily extinguished by smoke - Cast shadows that obscure the exit path - Require a battery or generator system that could fail or take up to 7 days to recharge
Installation	- Can be completed by any competent handyman	- Require costly installation by electricians
Maintenance	- Require occasional dusting	- Require annual inspection and regular replacement of bulbs, batteries, or generators
Life Span	- Have a 35-year life-span - Can be recycled	- Have a 2-7-year life-span - Are not recyclable
Environmental Impact	- Are not radioactive or toxic and use no energy	- Use energy and generate waste

 

The wrap

 

For stairways requiring outstanding durability, safety, accessibility and service life at a competitive price, look no further than compliant workplace solutions like Ecoglo's non-photoluminescent and photoluminescent cast-in-place and surface applied stair edge nosings and emergency exit signs at Tactile Solutions Canada. Leave a lasting impression by partnering with us to facilitate mobility and independence for all building users. Trust Tactile Solutions Canada as your source for code-compliant tactile solutions.

In today's world, creating inclusive and accessible public spaces is of utmost importance. Public spaces, such as rest stops, shopping centers, playgrounds, etc., must prioritize the needs of individuals with visual impairments or disabilities. 

 

One crucial aspect of accessibility is the implementation of Attention Tactile Solutions, specifically CSA-Compliant Attention Tiles. CSA-Compliance refers to adhering to the standards set by the Canadian Standards Association (CSA) for Attention Tactile Solutions. 

 

These attention tiles guide and alert individuals to potential hazards or changes in their surroundings, ensuring their safety and convenience. In this blog post, we'll cover the different types of attention-tactile solutions for public spaces. 

 

Understanding Attention Tactile Solutions

 

Canadian accessibility codes mandate the installation of Tactile Walking Surface Indicators (TWSI) to alert visually impaired individuals about potentially hazardous areas, enabling them to navigate public spaces safely and independently.

 

These solutions typically involve the installation of attention tiles on walking surfaces. By detecting the attention tiles through their canes or feet, visually impaired individuals can gather essential information about their surroundings, such as changes in direction, hazards, or entrances.

 

The Code-Compliant Tactile Solutions with truncated domes are designed in various materials, colors, and sizes to assure compliance in all situations, whether inside or outside, on newly constructed or on retrofit and existing surfaces. 

 

Different Types of Attention Tactile Solutions 

 

There is a wide range of attention-tactile solutions available, mainly categorized into two types: "cast-in-place" tiles and "surface applied tiles".

 

Some of the best types of Cast-In-Place attention-tactile solutions are:

 

Replaceable Cast-Iron Cast-in-Place: 

 

Advantage Replaceable Cast Iron Tactile Walking Surface Indicator (TWSI) plates are designed in strict accordance with ASTM A-48, Class 35B Grey Cast Iron. The Cast in Place System is lightweight with exceptionally high strength and uses advanced metallurgical Engineering Science and Technology to surpass municipal standards. These tiles offer a reliable way to improve safety and accessibility in any public space. 

 

Features:  

 

• Lightweight and easy to install

• Engineered to endure the toughest conditions, such as snow plows, overweight vehicular loads, and heavy pedestrian traffic

•  10-year manufacturer’s warranty

 

AccessTile Cast-In-Place Attention Domes: 

 

AccessTile Cast in Place Replaceable Tactile Attention Domes are leading the way in durability and detectability for tactile systems. This Canadian accessibility code-compliant Cast in Place truncated attention domes are suitable for all environments, providing top-quality solutions for tactile infrastructure products.

 

Access Tile Replaceable Cast in Place attention domes are installed in wet concrete at building exits near areas with moving vehicles. These detectable warning surfaces visually contrast the ground and provide a different texture to alert the people and help them navigate safely. These Replaceable Cast in Place tactile surface indicators are durable, weather-resistant, and proven to withstand wear and tear.

 

Features: 

 

• Lightweight and easy to handle
• The most cost-effective method of new curb ramp applications
• 5-year manufacturer’s warranty

 

Advantage Tactile Systems One Plate With Domes: 

 

Advantage ONE Plate Tactile Walking Surface Indicators(TWSI) are designed for all interior accessibility solutions. They incorporate a textured stainless steel surface for long-lasting slip resistance. These products undergo rigorous testing to surpass guidelines set by AODA, CSA, ISO, and building codes at provincial and national levels.

 

Features: 

 

• Resistant to heavy traffic abuse and maintenance machinery
• 5-year manufacturer’s warranty

 

Advantage Tactile Systems Cast Iron: 

 

Advantage Cast Iron Tactile Walking Surface Indicator (TWSI) plates are a reliable and time-tested solution for improving accessibility and safety. They offer several benefits, including aesthetic appeal, long-lasting durability, and a built-in slip-resistant surface for enhanced traction.

 

Features: 

 

• Lightweight and easy to install
• ASTM A48, Class 35B Grey Cast Iron
• 10-year manufacturer’s warranty

 

Armor Tile Tactile System Cast-In-Place: 

 

Armor-Tile Cast in place truncated domes are designed from a diamond-hard vitrified polymer composite material, making them an industry leader for their durability, strength, weather, and wear resistance. 

 

The applications of tactile walking surface indicators (TWSI) extend beyond their use in truncated domes. They are also suitable for curb ramps, escalator approaches, parking areas, transit platforms, top-of-stair landings/wheelchair ramps, multimodal transit stations, pedestrian crossings, and vehicular passageways.

 

Armor Tile cast-in-place domes meet all the requirements set by Canadian accessibility codes such as AODA, CSA, ISO, as well as provincial and national building codes (specifically Ontario's tactile walking surface indicators).

 

Features: 

 

• The most cost-effective method for new curb ramps 
• 5-year manufacturer’s warranty

 

Some of the best types of Surface Applied Tiles attention-tactile solutions are:

 

AccessTile Surface Applied Attention Domes: 

 

Access Tile Surface Applied Domes are the industry leader in affordable detectable warning tiles used for any retrofit job. They are ideal for various applications, such as multimodal transit stations, curb ramps, accessible pedestrian crossings, parking areas, tops and bottoms of stair landings, escalator approaches, and many more to alert the public when they're about to reach an unsafe edge.

 

These Tactile attention domes are useful for people with visual impairments, as they can be felt through footwear. These attention domes are also designed with unique sound reflections for those with guidance canes. This helps them differentiate between Access Tile surface tiles and concrete, allowing for safe and detectable navigation of curb endings.

 

Features: 

 

• A cost-effective method of retrofitting an existing curb ramp application
• Light weight and easy to handle
• 5-year manufacturer’s warranty

 

Advantage Tactile Systems Single Domes: 

 

The Advantage One Stainless Steel Dome Tactile System is a special and useful tactile solution for increasing safety and accessibility. These individual attention domes feature a permanent slip-resistant texture integrated into the stainless steel. Advantage One Individual Attention Domes are drilled and fastened directly into the ground and are specifically designed for all interior accessibility solutions.

 

Features: 

 

• Resistant to heavy traffic abuse and maintenance machinery
• 5-year manufacturer’s warranty

 

Eon Tile Rubber Attention Domes Tile: 

 

Eon Tile Rubber Attention Domes are durable and flexible tactile indicators ideal for designing and constructing high-quality commercial, institutional, and public spaces.

 

Eon Tile Attention Domes warn pedestrians, especially the visually impaired, about drop-off edges and areas without curbs or barriers to separate the pedestrian route from a vehicular traffic route. 

 

Features: 

 

• Appropriate for both initial installation and surface retrofit 
• 5-year manufacturer’s warranty

 

Elan Tile Porcelain Attention Domes Tile: 

 

Elan Tile Porcelain Tactile Indicator Attention Domes are designed for style, engineered for performance, and suitable for interior and exterior applications. Elan Tile offers highly durable and versatile walking surface indicators to alert pedestrians of potential hazards conditions ahead, indicating the end of a curb or an edge drop-off. Elan Tile Porcelain Attention Domes are fully compliant with the Canadian Accessibility code.

 

 Features

 

• Versatile and easy installation for interior and exterior environments
• Exceptional resistance to thermal shock, deep abrasions, and frost
• 5-year manufacturer’s warranty

 

Armor Tile Tactile System Surface Applied: 

 

The Armor-Tile surface applied tiles offer a cost-effective solution for retrofitting sidewalks. These tiles comply with Canadian accessibility codes, including AODA, CSA, ISO, and provincial and national building codes, specifically for Ontario's tactile walking surface indicators.

 

Features: 

 

• A cost-effective method of retrofitting existing sidewalks
• Lightweight and easy to handle 
• 5-year manufacturer’s warranty

 

AccessTile Fire Resistant Tile with Attention Domes: 

 

AccessTile Fire Resistant Tile with Attention Domes is an effective way to enhance accessibility and safety in high-risk areas. This Surface Applied fire-resistant tile, which meets the Ontario building code requirements, is their first composite tile.  These fire resistant Access tile is mandatory in high rise buildings with more than 7 floors.

 

Access Tile FR is the cost-effective interior solution for applying TWSI tactile warning surface indicators on floors, specifically in exit stairwells, vestibules, lobbies, and corridors. These Surface Applied Fire-Resistant tiles comply with building specifications in Ontario.

 

Features: 

 

• Beveled edges make for a smooth transition that meets Canadian Accessibility Codes
• 5-year manufacturer’s warranty